update ip

BME280MTTQ.ino

@@ -49,7 +49,7 @@ void MQTTcallback(char*, byte*, unsigned int);
 
 //MQTT
 const char *MQTT_BROKER = "loxberry";
-IPAddress mqttbroker(192,168,1,104);
+IPAddress mqttbroker(192,168,1,128);
 EthernetClient ethClient;
 PubSubClient MQTTclient(ethClient);
 
@@ -89,8 +89,8 @@ void setup() {
 		Serial.println(mqttbroker);
 	} else {
 		Serial.println("dns failed ");
-		Serial.println(	(MQTT_BROKER, mqttbroker,10));
-		mqttbroker.fromString("192.168.1.127");
+		Serial.println(	dnClient.getHostByName(MQTT_BROKER, mqttbroker,10));
+		mqttbroker.fromString("192.168.1.128");
 		Serial.println(mqttbroker);
 	}
 	bme.read(Pressure, Temperatur, Humidity);
@@ -123,15 +123,15 @@ void loop() {
 		Serial.println("connected to MQTT");
 	}
 	temp.toCharArray(buff,temp.length());
-	MQTTclient.publish("Arduino/Stall/Temperatur", buff);
+	MQTTclient.publish("Arduino/Aussen/Temperatur", buff);
 	press.toCharArray(buff,press.length());
-	MQTTclient.publish("Arduino/Stall/Pressure", buff);
+	MQTTclient.publish("Arduino/Aussen/Pressure", buff);
 	hum.toCharArray(buff,hum.length());
-	MQTTclient.publish("Arduino/Stall/Humidity", buff);
+	MQTTclient.publish("Arduino/Aussen/Humidity", buff);
 	snprintf(msg, 50, "%ld", millis());
 	Serial.println("Publish message: ");
 	Serial.println(msg);
-	MQTTclient.publish("Arduino/Stall/data/Alive", msg);
+	MQTTclient.publish("Arduino/Aussen/data/Alive", msg);
 
 //	MQTTclient.loop(); // Schleife für MQTT
 
@@ -171,10 +171,10 @@ void loop() {
 
 					client.print("Feuchtigkeit = "); //Prints information within qoutation
 					client.print(hum); //Prints the Humidity read from the DHT11 on PIN 5
-					client.println("% ");
+					client.println(" % ");
 					client.print("Temperature = ");
 					client.print(temp); //Prints the temperature read from the DHT11 on PIN 5
-					client.println("C ");
+					client.println(" C ");
 					client.print("Luftdruck = ");
 					client.print(press);
 					client.println(" [hPa]");