changes loop cnt from ms to cnt loops running (more stable)

IAQ2000+DHT11.ino

@@ -14,6 +14,8 @@ IAQ2000 iaq;
 
 DHT dht(dht_apin, DHT11);
 
+unsigned long loopcnt=0;
+
 // DNS
 DNSClient dnClient;
 
@@ -44,7 +46,7 @@ EthernetUDP Udp;
 
 //MQTT
 const char *MQTT_BROKER = "loxberry";
-IPAddress mqttbroker(192, 168, 1, 127);
+IPAddress mqttbroker(192, 168, 1, 35	);
 EthernetClient ethClient;
 PubSubClient MQTTclient(ethClient);
 
@@ -53,7 +55,6 @@ PubSubClient MQTTclient(ethClient);
 // (port 80 is default for HTTP):
 EthernetServer server(80);
 
-
 void setup() {
 	Wire.begin();
 	Serial.begin(9600);
@@ -80,9 +81,7 @@ void setup() {
 	iaq.initialize();
 
 	Serial.println(
-			iaq.testConnection() ?
-					"iAQ-2000 erfolgreich" :
-					"iAQ-2000 Fehler");
+			iaq.testConnection() ? "iAQ-2000 erfolgreich" : "iAQ-2000 Fehler");
 
 	dht.begin(); //DHT11 Sensor starten
 
@@ -108,6 +107,10 @@ void setup() {
 	//MQTTclient.setCallback(MQTTcallback);
 
 	//Serial.println("setup done");
+	dht.read();
+	airQuality = iaq.getIaqpred();
+	Temperatur = dht.readTemperature();
+	Humidity = dht.readHumidity();
 
 }
 
@@ -117,13 +120,11 @@ void loop() {
 	String hum = String(Humidity, 2);
 	char buff[20];
 
-	Serial.println("LOOP10");
+
 	dht.read(); //read data from pin 5 (DHT11)
-	Serial.println("LOOP20");
 	airQuality = iaq.getIaqpred();
 	Temperatur = dht.readTemperature();
 	Humidity = dht.readHumidity();
-	Serial.println("LOOP30");
 	//MQTT
 	if (!MQTTclient.connected()) {
 		MQTTclient.connect("Arduino", "loxberry", "OSVL0AMqISFXgr5g");
@@ -133,21 +134,23 @@ void loop() {
 		//MQTTclient.subscribe("/Stall/arduino1/#");
 		Serial.println("connected to MQTT");
 	}
-	temp.toCharArray(buff, temp.length());
-	MQTTclient.publish("Arduino/Stall/Temperatur", buff);
-	aq.toCharArray(buff, aq.length()+1);
-	MQTTclient.publish("Arduino/Stall/CO2", buff);
-	Serial.println("CO2 buff");
-	Serial.println(buff);
-	Serial.println(aq);
-	hum.toCharArray(buff, hum.length());
-	MQTTclient.publish("Arduino/Stall/Humidity", buff);
-	snprintf(buff, 19, "%ld", millis());
-	Serial.println("Publish message: ");
-	Serial.println(buff);
-	MQTTclient.publish("Arduino/Stall/data/Alive", buff);
-Serial.println("MQTT done");
-//	MQTTclient.loop(); // Schleife für MQTT
+
+	if (loopcnt++ % 1000 == 0) {
+		temp.toCharArray(buff, temp.length());
+		MQTTclient.publish("Arduino/Stall/Temperatur", buff);
+		aq.toCharArray(buff, aq.length() + 1);
+		MQTTclient.publish("Arduino/Stall/CO2", buff);
+		Serial.println("CO2 buff");
+		hum.toCharArray(buff, hum.length());
+		MQTTclient.publish("Arduino/Stall/Humidity", buff);
+		snprintf(buff, 19, "%ld", millis());
+		Serial.println("Publish message: ");
+		Serial.println(buff);
+		MQTTclient.publish("Arduino/Stall/data/Alive", buff);
+		Serial.println("MQTT done");
+		loopcnt = 1;
+	}
+	//	MQTTclient.loop(); // Schleife für MQTT
 
 	// schaut on ein UDP Befehl empfangen wurde
 	checkUDP();